The super quick Hydraulic measuring connector serv-Clip®
No only better …different!
√ Quick installation (only 3 minutes) - No need to cut open pipes
√ No shutdown of your installations – for mounting on pressurized pipes
√ Up to 630 bar / 9100 psi – screwed coupling M 16 X 2
√ Particle measurement according to ISO or NAS classes
Mit serv-Clip ® facilitates immediate measurement of
and more... measure immediately, Hydraulic measuring connector pipe measuring points sensorsin conjunction with virtually every type of measurement coupling and measuring equipment!
For pipe diameters with wall thickness up to 5 mm
serv-Clip ® is a patented product and registered trade mark of BKM-Hagen.
serv-Clip - the measuring attachment with a difference...
The use of Hydraulic measuring connector pipe measuring points sensorsthe serv-Clip does away with installation on more than 80% of all normal measuring points.
serv-Clip on new system
You have only to make plants to install normal measuring connectors at the necessary measuring points. serv-Clip is installed wherever required.
If required, Hydraulic measuring connector pipe measuring points sensorsyou can perform measurements immediately at any point on the system.
serv-Clip on older systems
It is possible to retrofit serv-Clip directly at the necessary points of the system.
By means of serv-Clip you are able to carry out measurements at any point on the system.
